ASTM-A632 2009

$35.75

A632-04(2009) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

Published By	Publication Date	Number of Pages
ASTM	2009	4

Guaranteed Safe Checkout

Categories: 23.040.10 - Iron and steel pipes, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

ASTM A632-04-Reapproved2009

Historical Standard: Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

ASTM A632

Scope

1.1 This specification covers grades of stainless steel tubing in sizes under ½ down to 0.050 in. (12.7 to 1.27 mm) in outside diameter and wall thicknesses less than 0.065 in. down to 0.005 in. (1.65 to 0.13 mm) for general corrosion-resisting and low- or high-temperature service, as designated in Table 1.

Note 1—The grades of austenitic stainless steel tubing furnished in accordance with this specification have been found suitable for low-temperature service down to −325°F (−200°C) in which Charpy notched-bar impact values of 15 ft·lbf (20 J), minimum, are required and these grades need not be impact tested.

1.2 Optional supplementary requirements are provided and, when desired, shall be so stated in the order.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Keywords

austenitic stainless steel; seamless tube; small diameter; stainless steel tube; steel tube; welded steel tube; Austenitic stainless steel tube–specifications; Corrosive service applications–tube (steel); Heavy-thickness steel coils–specifications; Hot-rolled steel sheet/strip–specifications; Stainless steel tube–specifications; Structural steel (SS) sheet/strip–specifications; Welded steel tube–specifications

ICS Code

ICS Number Code 23.040.10 (Iron and steel pipes)

DOI: 10.1520/A0632-04R09

PDF Catalog

PDF Pages	PDF Title
1	Scope Referenced Documents Ordering Information General Requirements Manufacture Chemical Composition Product Analysis
2	Mechanical Properties Permissible Variations in Dimensions Surface Condition Number of Tests Flaring Test TABLE 1 TABLE 2 TABLE 3
3	Hydrostatic, Air Underwater Pressure Test, or Nondestructive Electric Test Keywords

Additional information

Standard Title	A632-04(2009) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
Published Code	ASTM
Publication Date	2009
Pages Count	4
ICS Codes	23.040.10 - Iron and steel pipes