ASTM-A709 2004

$40.63

A709/A709M-04ae1 Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges

Published By	Publication Date	Number of Pages
ASTM	2004	8

Guaranteed Safe Checkout

Categories: 77.140.10 - Heat-treatable steels, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

1.1 This specification covers carbon and high-strength low-alloy steel structural shapes, plates, and bars and quenched and tempered alloy steel for structural plates intended for use in bridges. Eight grades are available in four yield strength levels as follows:

Grade U.S. [SI] Yield Strength, ksi [MPa] 36 [250] 36 [250] 50 [345] 50 [345] 50S [345S] 50 [345] 50W [345W] 50 [345] HPS 50W [HPS 345W] 50 [345] HPS 70W [HPS 485W] 70 [485] 100 [690] 100 [690] 100W [690W] 100 [690]

1.1.1 Grades 36 [250], 50 [345], 50S [345S], 50W [345W], 100 [690], and 100W [690W] are also included in Specifications A 36/A 36M, A 572/A 572M, A 992/A 992M, A 588/A 588M, and A 514/A 514M, respectively. When the supplementary requirements of this specification are specified, they exceed the requirements of Specifications A 36/A 36M, A 572/A 572M, A 992/A 992M, A 588/A 588M, and A 514/A 514M.

1.1.2 Grades 50W [345W], HPS 50W [HPS 345], HPS 70W [HPS 485W], and 100W [690W] have enhanced atmospheric corrosion resistance (see ). Product availability is shown in .

1.2 Grade HPS 70W [HPS 485W], 100 [690], or 100W [690W] shall not be substituted for Grades 36 [250], 50 [345], 50S [345S], 50W [345W], or HPS 50W [HPS 345W]. Grade 50W [345W], or HPS 50W [HPS 345W] shall not be substituted for Grades 36 [250], 50 [345] or 50S [345S] without agreement between the purchaser and the supplier.

1.3 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A 6/A 6M for information on weldability.

1.4 Supplementary requirements are available but shall apply only when specified by the purchaser at the time of ordering.

1.5 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.

1.6 For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A 6/A 6M apply.

PDF Catalog

PDF Pages	PDF Title
1	Scope Referenced Documents
2	General Requirements for Delivery Materials and Manufacture TABLE 1
3	Heat Treatment Chemical Requirements Tensile Requirements Brinell Hardness Requirements for Grades 100 [690] and 100W [690W] TABLE 2
4	Test Specimens and Number of Tension Tests TABLE 3 TABLE 4
5	Retests TABLE 5 TABLE 6 TABLE 7
6	Atmospheric Corrosion Resistance Marking Keywords TABLE S1.1
7	TABLE S1.2 TABLE S1.3

Additional information

Standard Title	A709/A709M-04ae1 Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
Published Code	ASTM
Publication Date	2004
Pages Count	8
ICS Codes	77.140.10 - Heat-treatable steels

Preview PDF


PDF Format	Searchable	Printable	Preview Now

ASTM-A709 2004

PDF Catalog

Related products