13.030 – Wastes – PDF Standards Store ?u= Wed, 06 Nov 2024 05:19:56 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 13.030 – Wastes – PDF Standards Store ?u= 32 32 TAPPI TIP 0603-02:2011 ?u=/product/publishers/tappi/tappi-tip-0603-022011/ Wed, 06 Nov 2024 05:19:56 +0000 Stickies Definition and Classification
Published By Publication Date Number of Pages
TAPPI 2011-01-01 3
]]> Paper recycling mills deal with stickies that cause problems on paper machine and affect product quality. Many terms used to discuss stickies related problems include: macro stickies, micro stickies, dispersed stickies, colloidal stickies, mini stickies, DISCO (dissolved and colloidal) stickies, primary stickies, secondary stickies, environmentally benign adhesives (EBA), recycle compatible adhesives (RCA), screenable stickies, removable stickies, depositable stickies, visible stickies, sub-visible stickies, and so on.

The purpose of this TIP is to explain and standardize some of the terms.

]]> TAPPI T 278 sp-17:2017 Edition ?u=/product/publishers/tappi/tappi-t-278-sp-17/ Wed, 06 Nov 2024 05:16:43 +0000 Pulp Screening (Valley-Type Screening Device)
Published By Publication Date Number of Pages
TAPPI 2017 3
]]> TAPPI T 278 sp-17 provides a laboratory screening procedure for pulps taken directly from a blow pit or discharged from digesters, eliminating time lapse and assuring uniform pulp properties.

This practice describes a method for separating debris from virgin or recycled pulps.

]]> NZS 9201.6:1999 ?u=/product/publishers/snz/nzs-9201-61999/ Wed, 06 Nov 2024 05:14:00 +0000 Model general bylaws - Solid waste
Published By Publication Date Number of Pages
SNZ 1999-08-31 12
]]> Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.

]]> NZS 9201.27:2000 ?u=/product/publishers/snz/nzs-9201-272000/ Wed, 06 Nov 2024 05:13:57 +0000 Model general bylaws - On-site wastewater disposal systems
Published By Publication Date Number of Pages
SNZ 2000-05-31 17
]]> Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.

]]> NZS 9201.22:1999 ?u=/product/publishers/snz/nzs-9201-221999/ Wed, 06 Nov 2024 05:13:55 +0000 Model general bylaws - Wastewater drainage
Published By Publication Date Number of Pages
SNZ 1999-08-31 40
]]> Contains provisions in the form of model bylaws for wastewater drainage from both domestic and trade premises to a Wastewater Authority.

]]> NZS 9201.23:2004 ?u=/product/publishers/snz/nzs-9201-232004/ Wed, 06 Nov 2024 05:13:55 +0000 Model general bylaws - Trade waste
Published By Publication Date Number of Pages
SNZ 2004-11-30 88
]]> Provides a suitable model for all Territorial Authorities when dealing with trade waste discharges, which are empowered under Part 8 of the Local Government Act 2002 to make bylaws. The bylaw also includes a Guideline, which should be read in conjunction with it.

]]> NZS 7603:1979 ?u=/product/publishers/snz/nzs-76031979/ Wed, 06 Nov 2024 05:13:27 +0000 Specification for refuse bags for local authority collection (low density polyethylene)
Published By Publication Date Number of Pages
SNZ 1979-05-31 12
]]> Covers the material, dimensions, properties, tests and marking requirements of low density polyethylene bags intended for both domestic and commercial refuse collection and which are normally issued by and collected by local authorities or their contractors.

]]> NZS 5202:1979 ?u=/product/publishers/snz/nzs-52021979/ Wed, 06 Nov 2024 05:12:28 +0000 Specification for incinerators
Published By Publication Date Number of Pages
SNZ 1979 22
]]> The design, performance, construction, installation and operation of industrial, local authority and commercial incinerators.

]]> SAE USCAR 27:2007 ?u=/product/publishers/sae/sae-uscar-272007/ Wed, 06 Nov 2024 05:02:44 +0000 Specification for Testing Gas Discharge Light Source Subsystem
Published By Publication Date Number of Pages
SAE 2007-10-08 56
]]>
This specification is a general level subsystem light source specification that establishes test requirements of a Gas Discharge Light Source (GDLS) subsystem for use on passenger vehicles.
The completed test data to this test specification is intended to be provided to the OEM by the Tier one lamp set maker as part of the lamp assembly PPAP. Re-testing shall be required if any portion of the approved GDLS experiences a design, manufacturing or component change.
This document shall be applied to systems that meet the requirements for design, performance and validation established by government standards.
The subsystem is defined as the ballast, igniter and light source and shall be tested as a subsystem and considered one test sample for the entire test sequence. A failure of any component in the test sample shall constitute a failure of the entire sample. Substitution or replacement of only the light source shall be allowed during testing. Failure of the light source more than once in a tested system shall constitute a failure of the GDLS. If other manufacture’s components are intended to be approved for use in the GDLS, then those possible combinations of components shall be considered a new GDLS and shall also be tested.
Additional testing may be required by individual OEM’s to meet specific EMC, quality, reliability and durability objectives.
The following tests are to be performed under the following conditions:
  • New light source (capsule) or ballast design
  • Design or process change made to an existing capsule or ballast, which could affect the outcome of the test
  • Completion of one calendar year as noted in the “ANNUAL TESTS” Table shown in the Appendix. (Note: Production process control data, collected at a shorter interval per an approved control plan, may be substituted if approved by customer’s responsible engineer and purchasing representative.)
]]> SAE J 3030:2020 ?u=/product/publishers/sae/sae-j-30302020/ Wed, 06 Nov 2024 04:52:06 +0000 Automotive Refrigerant Recovery/Recycling/Recharging Equipment Intended for Use with Both R-1234Yf and R-134a
Published By Publication Date Number of Pages
SAE 2020-11-13 13
]]>
The purpose of this SAE Standard is to establish the specific minimum equipment requirements for recovery/recycling/recharge equipment intended for use with both R-1234yf and R-134a in a common refrigerant circuit that has been directly removed from, and is intended for reuse in, mobile air-conditioning (A/C) systems. This document does not apply to equipment used for R-1234yf and R-134a having a common enclosure with separate circuits for each refrigerant, although some amount of separate circuitry for each refrigerant could be used.
]]>